Gyaran janareta na DIY akan VAZ 2107

Ina so in faɗi nan da nan cewa ba zan bayyana duk hanyoyin gyaran wannan na'ura dalla-dalla ba, amma zan ba da manyan abubuwan da masu mallakar VAZ 2107 sukan yi sau da yawa. Zan fara da kayan aikin da ake buƙata don gyarawa. kuma a kwance janareta akan “classic”:

1. Maɓalli 19 - hula ya fi dacewa
2. Socket kai ga 8 da 10
3. Tsawo
4. Guduma

Yanzu, a ƙasa zan bayyana dalla-dalla game da hanyar rarrabawa, da kuma rarraba kowane sashi daban.

Maye gurbin goga a kan janareta

A gaskiya ma, irin wannan gyaran yana da sauƙi don haka ba zan tsaya a kan wannan ba a cikin wannan labarin. Amma idan kowa yana buƙatar cikakkun bayanai, to, zaku iya fahimtar kanku da cikakkun bayanai. a nan.

Cikakkun tarwatsewa cikin sassa

Da farko, muna kwance ƙwaya 4 waɗanda ke kan murfin baya na na'urar, kuma suna bayyane sosai a hoton ƙasa:

Sa'an nan kuma mu yi ƙoƙari mu kwance goro mai ɗaure tare da maɓalli 19. Yawancin lokaci, yana da ƙarfi sosai kuma yana da matsala don yin haka a kan janareta da aka cire idan ba ku matsa shi a cikin vise ba. Amma akwai hanyar fita - yana yiwuwa daga baya gefen, inda muka unscrewed kwayoyi, matsa lamba a kan kusoshi sabõda haka, su huta da impeller ruwan wukake, game da shi gyarawa a cikin wani m jihar. Na gaba, zaku iya ƙoƙarin kwance wannan goro ta hanyar riƙe janareta a tsaye.

Yanzu muna ɗaukar guduma kuma, tare da bugun haske, ƙoƙarin raba janareta zuwa sassa biyu, kamar yadda aka nuna a fili a cikin hoton da ke ƙasa:

A sakamakon haka, ya kamata ku sami wani abu kamar haka:

Kamar yadda kake gani da kanka, za a sami rotor a gefe ɗaya, da kuma stator (winding) a ɗayan.

Cire da Sauyawa Rotor

Ana iya cire shi sosai a sauƙaƙe, da farko mun cire puley, cire shi daga shaft:

Sa'an nan kuma mu fitar da maɓallin:

Kuma yanzu zaka iya cire rotor na janareta Vaz 2107, tun da sauƙin saki daga yanayin:

Yanzu za ku iya ci gaba.

Cire iska (stator)

Don yin wannan, cire ƙwaya guda uku daga ciki tare da kai, kamar yadda aka nuna a hoton:

Kuma bayan haka, ana iya cire stator ba tare da matsaloli ba, tunda an cire shi daga gada diode:

Idan yana buƙatar maye gurbin kuma kuna buƙatar cire shi gaba ɗaya, to ba shakka zai zama dole don cire haɗin toshe tare da wayoyi, wanda ke bayyane a saman hoto.

Game da maye gurbin gadar diode (naúrar gyarawa)

Tun da bayan cire iska, gada diode kusan kyauta ce, kusan babu abin da za a ce game da maye gurbinsa. Abin da kawai za a yi shi ne a tura kusoshi daga ciki don su fito daga waje:

Kuma duk gadar diode an cire gaba ɗaya kuma zaku iya maye gurbinsa:

Bayan aiwatar da gyaran da ake buƙata na janareta, za mu haɗa shi a cikin juzu'i kuma kar a manta da haɗa duk wayoyi masu juyawa daidai.