Me yasa Maye gurbin V-ribbed Belts Akan Motoci Tare da Iyakantaccen Tsare-tsare na ƙasa na iya zama da wahala

Maye gurbin bel ɗin V-ribbed sabis ne wanda zai iya haɗawa da yin wasu hadaddun motsa jiki akan injin, musamman akan motocin da ke da iyakacin tsayin hawa.

Motocin fasinja da ƙananan SUVs tare da gaba da duk abin hawa za su sami matsalolin sharewa idan aka zo wurin maye gurbin bel ɗin V-ribbed.

Belin ribbed, wanda kuma aka sani da Multi-ribbed, Multi-ribbed, ko Multi-ribbed bel, bel guda ɗaya ne, mai ci gaba da yin amfani da shi don fitar da na'urori da yawa a cikin injin mota, kamar na'ura mai canzawa, famfo mai sarrafa wutar lantarki, ko famfo ruwa. . .

Maye gurbin bel ɗin poly V na iya bambanta dangane da yanayin lalacewa. Yana iya zama tsoho ne kawai kuma yanayi ya fashe, ko kuma yana iya zama abin ɗaure bel ɗin ko ɗigon ɗigon ya gaza ya sa bel ɗin ya miƙe da kyalli.

Ga mafi yawan abin hawa gaba da kuma motocin tuƙi huɗu, bel ɗin V-ribbed yawanci yana da wahalar maye ta hanyoyi da yawa. A mafi yawan lokuta, daidaitaccen ratchet ba zai iya shiga tsakanin bel tensioner da fender ko ma yanar gizo. Zai yi kama da cewa dole ne a cire shingen ciki don samun dama ga bel tensioner, amma cire shingen ciki na iya zama mai wahala da cin lokaci. Sabili da haka, an ƙirƙiri kayan aiki ne kawai don motsa bel ɗin bel don cire bel ɗin V-ribbed.

Wasu motocin tuƙi na gaba suna da manyan injina waɗanda aka fi sani da ƙasusuwan kare. Ana ɗora waɗannan abubuwan hawa na injin ko dai daga saman injin ɗin zuwa gaban abin hawa ko kuma gefen abin hawa. Lokacin da injin ya tashi daga saman injin ɗin zuwa shinge na ciki, yana ƙoƙarin shiga hanyar cire bel ɗin V-ribbed.

Idan ya zama dole don cire hawan motar daga saman motar, dole ne a kiyaye motar a kan girgiza don hana lalacewa ga wasu sassa kuma don sauƙaƙe sake haɗuwa da motar.

Dole ne a ɗaga wasu motocin daga ƙasa don isa ga na'urar bel. Har ila yau, ga wasu motocin, lokacin da ake buƙatar hawa daga ƙasa ta cikin ɗakin injin, za a iya samun mai gadin inji wanda dole ne a cire shi kafin samun damar shiga bel na V-ribbed.

Lokacin cire bel ɗin V-ribbed, yana iya zama da wahala a cire bel ɗin daga wasu jakunkuna kuma yana da wahala sosai lokacin sanya sabon bel. Zai fi kyau a bi zane akan sitilar abin hawa da ke kan murfin kaho ko kaho. Idan abin hawa ba shi da ma'anar zane, wata hanya dabam don ganin yadda ake karkatar da bel ɗin maciji shine duba zane daga littafin jagorar mai shi.

Bayan ɗora bel ɗin maciji, yana da kyau a riƙe shi sama kuma a sami ɗigon saman don ɗaure shi. Yayin riƙe bel ɗin, yi amfani da kayan aikin ɗaurin ɗaurin bel don sassauta abin tashin hankali ta yadda bel ɗin zai iya zamewa cikin sauƙi a saman ɗigon saman na ƙarshe. Lokacin da aka saki mai ɗaurin bel ɗin, bel ɗin V-ribbed dole ne ya daidaita daidai.

• Tsanaki: Kafin fara injin, tabbatar da duba bel ɗin V-ribbed don daidaitawa da shigarwa daidai.

Idan kana buƙatar maye gurbin bel ɗin V-ribbed, ɗauki ɗaya daga cikin injiniyoyinmu kuma za mu yi farin cikin taimakawa.