Turmi rake don seeders SDS plus

	SDS plus drill ya bambanta da rawar jiki na al'ada domin yana da ƙarfi kuma yana da tsarin chuck daban-daban.
	Don haka, nau'ikan na'urorin da za a iya amfani da su a cikin SDS da drills suna da nau'i-nau'i daban-daban fiye da waɗanda aka yi amfani da su a na'urorin lantarki na al'ada.
	Na'urorin lantarki da nau'in nau'in SDS suna da nau'i daban-daban, don haka ƙugiya na rawar jiki sun bambanta.
SDS tare da shanks
	Shank na turmi da aka ƙera don SDS plus drill yana da nau'in zaren ciki na mace kamar na turmi da aka ƙera don injin niƙa. An lulluɓe shi akan zaren namiji na SDS da adaftar rake na turmi. Duk da haka, girman zaren ya yi ƙanƙanta fiye da na igiya mai niƙa mai kusurwa.
	Adaftar turmi da aka ƙera don SDS plus drill yana ƙunshe da zaren waje wanda aka dunƙule turmi a kai, kuma a ɗayan ƙarshen yana da ƙugiya da aka ƙera don sakawa a cikin chuck na SDS da drills.
	Anan shank akan adaftar ya bambanta.
	Adaftar shank don SDS da drills yana da nau'ikan sarewa guda huɗu: biyu tare da buɗaɗɗen ƙarshen da biyu tare da rufaffiyar ƙarshen. Biyu daga cikin waɗannan tsagi su ne inda ƙwanƙwasa ƙwanƙwasa ƙwallo (ƙarar rufe) ke juyawa, sauran biyun kuma inda turmi rake shank (buɗaɗɗen ƙarshen) ke shiga. Don haka, adaftar ba ta da ƙarfi a cikin chuck, kamar yadda yake a cikin madaidaicin rawar jiki. Madadin haka, ramukan "buɗe" da "rufe" tare da ɓangarorin adaftar turmi suna samar da tashoshi waɗanda ƙwallan ƙwallon SDS da ƙwanƙwasa na iya zamewa gaba da gaba. Wannan yana riƙe motsi sama da ƙasa, yana hana bututun ƙarfe daga zamewa ko jujjuya cikin yardar rai.
	Ba kamar daidaitaccen mai shuka ba, SDS ɗin yana ɗaukar mafi yawan girgiza yayin aiki, yana sauƙaƙa yin rake ba tare da cutar da mai aiki ba.
	Amfanin amfani da SDS da drills shine cewa an saka shank a cikin SDS drill chuck kuma a juya har sai ya dace da ramukan da ke cikin chuck. Sunan SDS ya fito ne daga Jamusanci "Sterk, Dreh, Sitz" (saka, karkatarwa, ɗaure), wanda kuma masana'antun Bosch suka sani a matsayin "Tsarin Kai tsaye na Musamman".
	SDS shank ana kiransa SDS da shank ko TE-C shank. Waɗannan sharuɗɗan suna gaya muku irin nau'in rawar da aka ƙera don chuck ɗin ku. "TE-C" madadin sunan da aka kafa don rawar jiki da na'ura na SDS da nau'in. Ana amfani da sunan "TE-C" ta kamfanin gine-gine na duniya Hilti.
	Akwai nau'ikan wasan motsa jiki na SDS da yawa. SDS da SDS da chucks da shanks suna musanyawa. Koyaya, na'urorin haɗi na SDS Max basu dace da ɗayansu ba.
	Kuna iya faɗi wace adaftar da zata dace da SDS ɗinku da rawar soja saboda diamita na shank da lamba da wurin sarewa tare da shank ɗin rawar soja suna bin daidaitaccen tsari na SDS da drills.
	Ana amfani da rake turmi da aka nuna anan tare da adaftan kuma an tsara shi don dacewa da SDS da mai shuka.